6SL3254-0AM00-0AA0

Documentation

Dimensions

Description

The parameter settings for an inverter can be stored on the MMC memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediately ready for use again.
• Parameter settings can be written from the MMC memory card to the inverter or saved from the inverter to the MMC memory card.
• Up to 100 parameter sets can be stored.
• Supports series commissioning without the use of additional commissioning tools (e.g. BOP and STARTER).
• Commissioning with the MMC memory card is defined by the user:
- Parameter p8458 = 0 - parameter set 0 is never automatically downloaded from the MMC (“never”)
- Parameter p8458 = 1 - parameter set 0 is downloaded once after PowerOn (“once”)
- Parameter p8458 = 2 - parameter set 0 is always downloaded after PowerOn (“always”)
The MMC memory card is not required for operation and does not have to remain inserted.The CU240E Control Unit does not have a slot for the MMC memory card.